The RF Code OPC Server for Zone Manager publishes all information
from Zone Manager to the OPC Data Access (DA) standard. By integrating
Zone Manager with OPC, RF Code’s wire-free sensor tag information
and active RFID tag information can flow into various OPC Client
based systems such as SCADA applications, building management
systems, and industrial controls systems.
The OPC Server for Zone Manager is a stand-alone integration
application that installs on a Windows based system. It can be
installed on the same system as Zone Manager or on a remote /
different system. One OPC Server for Zone Manager is required
for each Zone Manager system and is accessible by one or more
OPC client applications simultaneously.
The OPC Server for Zone Manager makes the following information
available to OPC client applications:
- Asset Tag data: Location, online/offline status, battery status,
motion status, tamper status
- Sensor Tag data: Location, online/offline status, battery
status, sensor information (temperature, humidity, fluid detection,
door status, dry contact)
- RF Code Reader data: Status, noise level, event rate, tag
capacity utilized, firmware version
All of the above information is updated in real-time so consuming
OPC applications are assured to have up to the minute data from
the RF Code solution.
RF Code’s OPC Server conforms to the OPC Data Access (DA) specification
versions 1.0a, 2.05a, and 3.0. RF Code has received certification
for both version 2.05a and version 3.0 from the OPC Foundation.