The 433 MHz R120 door tag is a battery-powered RF transmitter that attaches to standard IT rack cabinet doors, or any door / frame that needs to be continuously monitored. Once installed on the door frame the R120 will monitor and report the door status, enabling you to track enclosure access attempts using your active… Continue Reading →
The R130 Dry Contact Tag, a battery-powered RF transmitter that attaches to assets that need to be tracked, located and monitored, features two twisted wires that enable connection to a dry contact device. Once connected, the R130 will monitor and report the open and closed states of the device. While the connected device is in… Continue Reading →
The R135 Fluid Detector Tag is a real-time liquid detection sensor that totally eliminates the need to wire or cable a data center for liquid leak detection capabilities. Combining thin-film technology with RF Code’s real-time, wire-free environmental monitoring technology, the new sensor provides the freedom and ease to deploy liquid detection wherever vulnerabilities to conductive… Continue Reading →
The 433 MHz R150 Temperature Tag is a battery-powered RF transmitter that monitors temperature-sensitive items, such as assets in IT racks. Periodically reporting its own unique ID along with the ambient temperature observed by the tag, the R150 is designed for use in a variety of environmental monitoring applications. This affordable sensor tag is sealed… Continue Reading →
The R151 Tethered Temperature Sensor is a battery-powered RF transmitter that monitors and reports the temperature observed by a digital thermometer that is embedded at the end of a 6-foot wire (tether). This modular design provides physical separation between the RF transmitter (tag) and the sealed temperature sensor itself; this allows the tethered sensor to… Continue Reading →
RF Code’s R155 Humidity-Temperature Tag monitors and reports the relative humidity and ambient temperature in its immediate environment. It is designed for use in environmentally-sensitive areas, such as IT data centers. Periodically reporting its unique ID along with the sensor data observed by the tag, the R155 is designed for use in combination with RF… Continue Reading →
RF Code’s R160 Differential Air Pressure Sensor monitors and reports the differential air pressure reading between two points (e.g., above vs. below a raised floor or room vs. plenum). While the pressure ranges found in the data center can exceed 0-0.5″ H20/0-125 Pa, the pressure differentials found in the plenum are often only 0.01″ H20/2.5… Continue Reading →
RF Code and Raritan have worked collaboratively to integrate RF Code’s wire-free sensor technology with Raritan’s industry leading rack power distribution units (PDUs). The result of this effort is the RF Code R170 PDU Sensor Tag for Raritan which enables data center managers to monitor real-time power consumption and utilization via RF Code’s wire-free sensor… Continue Reading →
RF Code’s R170 tags for Server Technology integrate with Server Technology’s CDUs which run custom firmware to support the RF Code device. The CDU Sensor Tag allows power monitoring information to be transmitted and utilized by RF Code’s “wire-free” radio frequency infrastructure. This results in comprehensive power monitoring information from Server Technology’s CDUs being made… Continue Reading →
RF Code and Geist have worked collaboratively to integrate RF Code’s wire-free sensor technology with Geist’s rack power distribution units (PDUs), including phase configuration, average RMS amperage, feed line set ID, and tower ID. The result: the RF Code R170 PDU Sensor Tag for Geist, which enables data center managers to monitor real-time power consumption… Continue Reading →
R170 tags integrate with Emerson/Liebert rack PDUs to monitor power consumption trends and utilization. The tags periodically report their own unique ID, the PDU model, serial number and PDU operational values, including: phase configuration, average RMS voltage and amperage, feed line set ID, and tower ID. The RF Code / Emerson wireless solution is ideal… Continue Reading →
The A740 Rack Locator is an infrared (IR) signaling unit designed for use in IT data centers with open or closed server racks. When deployed in concert with IR-enabled tags (including the R104-i IR-Enabled IT Asset Tag, R114-i IR-Enabled Flex Mount Tags, and A750 Room Locators) the system provides a method of locating tagged assets… Continue Reading →
The A750 Room Locator is an IR (infrared) signaling unit used with IR-enabled tags to provide a method of locating tagged assets. Each Room Locator transmits an infrared pulse pattern containing a unique 3-digit location code. The strength of the IR transmissions can be manually adjusted, with typical coverage perimeters measuring 35 feet. Coverage zones… Continue Reading →
A Helical antenna is made from a coiled, small-diameter spring which is flexible and coated in plastic. The name comes from the conducting wire inside which is coiled in the form of a helix. It responds to electromagentic fields with circular polarization. A pair of these antennas is commonly attached directly to RF Code readers… Continue Reading →
A Yagi antenna, is a directional antenna consisting of a driven element (typically a dipole or folded dipole) and additional parasitic elements (usually a so-called reflector and one or more directors). The reflector element is slightly longer (typically 5% longer) than the driven dipole, whereas the so-called directors are a little bit shorter. This design… Continue Reading →
Omnidirectional Anntennas An Omnidirectional antenna operates by creating a pattern that is equally effective in all directions. The size of the antenna will vary with the frequency and gain for which it has been manufactured. Unlike a directional Yagi antenna, an omni antenna offers a non-directional pattern that spreads out in all directions. A pair… Continue Reading →
The M220 is a battery-powered, portable reader which processes active RFID tag data and links directly to a wide variety of Bluetooth-enabled computing devices. The capabilities of the rugged, lightweight reader further enhance a customer’s ability to monitor mobile assets or personnel. It is equally valuable for the performance of on-demand audits and field inventories…. Continue Reading →
M250 readers are dual-channel radio receivers tuned to 433.92 MHz. The readers are programmed, calibrated and dedicated to interpreting and reporting the radio frequency messages emitted by RF Code tags. Tag transmissions are processed in real-time to quickly locate and identify tagged assets or personnel in defined areas. M250 readers are compatible with wired and… Continue Reading →
AirLock Latch-Together Cleanrooms and Enclosures Benefits The AirLock cleanroom and other Simplex enclosures help you protect against airborne contaminants, ultraviolet light, temperature fluctuations and even harmful noise. Create either positive or negative pressure environments, depending on your needs. Achieve up to ISO 4 (Class 10) clean levels. Rooms go together easily with a minimum amount… Continue Reading →
Benefits AirBlock, the #1 specified curtain in the industry, offers versatility and reliability that cannot be found with any other product. AirBlock curtains can be used with framing to create a cleanroom, or also used independently within an existing cleanroom to create areas that are still cleaner. Combined with Simplex’s superior mounting systems, AirBlock curtains… Continue Reading →
SIS – One Extrusion Does It All!! Benefits The Simplex SIS Modular Frame System stacks versatility upon versatility. The SIS provides a wide variety of enclosure solutions for cleanrooms, dust control, sound control, safety and other industrial applications. The system is designed for fast construction and can be easily customized. Enclosures can be fitted with… Continue Reading →
The SIS 797 system uses individual modular frames which are easily assembled with internal corner keys. Frames are available pre-assembled or shipped unassembled. SIS-797 with ACT! Isolation and environmental control has taken a huge step forward for the medical device and pharmaceutical industries, thanks to the latest innovation from Simplex Isolation Systems. The Simplex SIS… Continue Reading →
Cleanroom Doorways – AirLock Doors and Venting Options AirLock Doors are pre-hung in their frames for quick and easy installation. They are available in the same materials as AirLock walls. Your selection of the proper door depends on your application, contamination concerns and layout. See the complete line of cleanroom solutions and other Simplex enclosures… Continue Reading →
Ceiling Style Options Airlock cleanrooms and other Simplex isolation enclosures offer a variety of ceiling options, including suspended ceilings that can accommodate light, medium and heavy load needs. The modular frame components are structurally designed for easy assembly and can be adapted to various room configurations. Ceiling options include all-vinyl ceilings in both clear and… Continue Reading →
Armor-Bond and AirBlock Strip Doors: The #1 Specified Vinyl Strip Doors in the Industry! With Simplex strip doors you can cover door openings, both large and small, yet ensure easy pass-through by a technician, transport cart or forklift. Simplex vinyl strip doors prevent up to 80% to 90 of air loss that occurs when main… Continue Reading →
Here’s Some Tips for Your Vinyl Strip Door Selection Strip doors are available in many widths, thicknesses and colors. The strip doors feature the exclusive Simplex clear/frost non-stick design for easy personnel and equipment passage. In smaller doors, use smaller strips which are easier to pass through. As the door gets taller, you can increase… Continue Reading →
Heavy duty application using 12-inch strips to accommodate forklifts and other traffic. Eight-inch strips work well with lighter traffic Armor-Bond Industrial Strip Doors Save up to 30% on energy costs! Energy reductions of as much as 30% are not uncommon with Simplex strip doors on coolers, freezers and refrigerated deli cases. Proven by years of… Continue Reading →
Personnel Strip Door Personnel Strip Doors Stops cold-air loss. Saves 30% to 50% on your energy and maintenance costs. Increases employee comfort. Controls dust, noise and smoke at open doorways. Ideal for supermarket and restaurant walk-in coolers and freezers. Also ideal for institutional and office doors. One-year warranty. Easiest strip door to install. Strips can… Continue Reading →
Refrigerated Strip Doors Refrigerated Truck Strip Doors Simplex Refrigeration Strip Doors Benefits Simplex refrigeration strips prevent 80% to 90% of air loss experienced when you use conventional refrigerator doors. Temperatures remain stable. You will experience less shrinkage, product spoilage, less frost build-up on coils, and reduced wear and tear on compressors, motors and switches. Superior… Continue Reading →
AirBlock Strip Divider Systems Use for larger areas to divide or separate product, processes or personnel. Protects against cross contamination and helps to increase product yields. Protects against sound, temperature, light transmission, dust and other airborne contaminants. Less expensive than hardwall alternatives and offers greater employee safety. Requires no permits and can be easily moved… Continue Reading →
Close up of SoundBlock material SoundBlock Insulated Strips and Panels Up to a 48 decibel sound drop. Excellent for high-frequency noise (saws, mills, compressors, etc.) Available in clear vinyl outer layer for safety. Tinted and opaque colors also available. 100% waterproof. Suitable for outdoor use. Easy to clean. A smooth, sealed non-porous surface. SB-4012 —… Continue Reading →
Strip Screen Ventilated Strips and Panels Our heavy-duty, vinyl coated polyester screenmesh is RF welded into strips. The size of the screen area can be adjusted depending on the required ventilation and type of traffic through the strips. Use on any doorway or area where you want to keep bugs, birds and other flying debris… Continue Reading →
Colored stock room strip doors are available in tinted or solid opaque colors. They are more economical than impact doors and don’t require reinforcement or doorjambs for installation. These specialized strip doors allow for fast, easy passage for personnel, hand trucks or forklifts and are attractive in appearance. RF heat sealed for superior strength. Use… Continue Reading →
Materials Standard Vinyl Compound – Our Standard Compound vinyl is the best in the industry. It is designed and formulated to resist yellowing, curling and cracking, even in the harshest outdoor environments. Solid, Opaque and Tinted Colors – Available in blue, tan, grey, black and white for decorative use. Amber tint is suitable for light… Continue Reading →
Innovative Mounting Systems (patent number 4,312,396 and other patents pending) The reputation Simplex has for long lasting strips lies in our unique patented mounting system. Other manufacturers use the antiquated bolt-up method to mount their strips, which puts stress in the strip at the mounting point. This method of mounting creates the”coat hanger effect”. At… Continue Reading →
Benefits AirBlock, the #1 specified curtain in the industry, offers versatility and reliability that cannot be found with any other product. AirBlock curtains can be used with framing to create a cleanroom, or also used independently within an existing cleanroom to create areas that are still cleaner. Combined with Simplex’s superior mounting systems, AirBlock curtains… Continue Reading →
Industrial Curtains and Barrier Sound Curtains Benefits Airblock industrial curtains can help you save tens of thousands of dollars on energy costs every year. Also use AirBlock curtains as welding, sound and chip screens to offer employees additional safety in the manufacturing environment. AirBlock screens help you met the requirements of OSHA and keep your… Continue Reading →
Sure-Fold Bi-folding Curtains These retractable, industrial strength curtain barriers help you isolate your work area, save energy and control cross-contamination. With heavy-duty material and Sure-Fold reinforced attachment system you get the best performing, longest lasting retractable curtain in the industry. A full selection of curtain materials including opaque colors, transparent colors, screen materials and welding… Continue Reading →
Simplex realizes that every application is unique. That is why they designed the innovative hookbead mounting system for softwall curtains. This two-piece mounting system makes installation of even large softwall panels simple. The t-bar clip design allows you to attach to your existing t-grid ceiling without drilling. Options include a suspended t-bar for mounting to… Continue Reading →
Data Center Managers: Slash Energy Costs with Better Air Flow Dynamics! Save energy! AirBlock™ data center curtains and partitions save energy on air conditioning by as much as 15% and up to 67% on fans. Protect your mission critical operations. Maximize airflow dynamics and increase the effectiveness of your hot aisle/cold aisle isolation. Simplex’s complete… Continue Reading →
The CommandCenter NOC family of management appliances helps businesses address a wide range of IT problems before they occur. It keeps your IT infrastructure under constant scrutiny to guard against network outages, degradation, performance slowdowns, security weaknesses and incoming attacks. CommandCenter NOC provides the following world-class network and systems management capabilities: Traffic analysis, vulnerability scanning,… Continue Reading →
CommandCenter® Secure Gateway (CC Secure Gateway) is a management appliance that provides unified, secure, browser-based access to KVM, serial and power control devices in data centers. Compatible with Raritan’s Dominion® Series, Paragon®, IP-Reach® and CommandCenter® NOC, CC Secure Gateway provides centralized policy and security management of users and devices connected to Raritan products, embedded solutions… Continue Reading →
Dominion KX is an enterprise-class, secure, digital KVM-over-IP switch that provides 2, 3, 4, or 5 concurrent users with BIOS-level control of up to 64 servers or other IT devices from a single KVM console. It puts secure, server control in the hands of authenticated users whether they are at the rack, on-site, or off-site,… Continue Reading →
Paragon II is Raritan’s battle-tested Cat5 enterpriseclass, analog KVM solution that gives IT professionals the power to securely access and control servers and other network devices anytime, anywhere. Paragon II offers the broadest line of KVM switches, with 4 models that provide non-blocked access for up to 64 simultaneous users controlling more than 10,000 servers,… Continue Reading →
For an innovative KVM solution that makes the most of limited server room space, Z-Series are the products for you. Chain-like Arrangement Compact Computer Interface Modules (Z-CIMs) plug into the back of servers and are connected with Category 5 cables in a chain-like arrangement. An additional Category 5 cable leads to a User Station, giving… Continue Reading →
MasterConsole is the perfect solution for mid-size and larger data centers in need of a powerful KVM switch to gain control of their servers. With nine fully-featured models to suit a wide variety of needs, MasterConsole is highly scalable, yet simple and reliable. Innovative Features Masterconsole includes KVM-over-IP access, an advanced on-screen user interface, security… Continue Reading →
DOWNLOAD DATA SHEET CompuSwitch® KVM Switch is the affordable choice and the perfect KVM switch for desktop or rack mount installations where a single user can access and control up to eight PCs from one keyboard, monitor and mouse. It is expandable up to 64 computers. With CompuSwitch, you can eliminate the cost and clutter… Continue Reading →
SwitchMan® is a line of desktop KVM switch products for the small office/home office (SOHO) user that needs to control multiple PCs with a single keyboard, monitor and mouse. SwitchMan is ideal for situations where desktop space is a premium. By eliminating the need for separate keyboards, video monitors and mouse devices for each PC,… Continue Reading →
Paragon UMT2161 2-User, 16-Port KVM Switch The Paragon UMT2161 Matrix Switching Unit brings Paragon Power and Cat5 Simplicity to small to mid-sized server rooms, at an entry level price. Local User Port for Rack Access The UMT2161 is the first Paragon model to feature a local KVM user port for access via PS/2 or Sun… Continue Reading →
Liebert Economizer Solutions Liebert Air Economizer, GLYCOOL Economization Option, and Chiller Plant Compatibility Features: Air and fluid economizers Free-cooling options reduce compressor and pump operation Monitors and controls operation with Liebert iCOM 5-60 Ton systems DOWNLOAD BROCHURE BACK TO ECONOMIZER COOLING SOLUTIONS
Liebert Outdoor Condenser Liebert Air Cooled Condensers, Liebert Quiet-Line Condensers, Liebert TCDV Condensers Features: System-matched outdoor condenser Operates in low temperatures with winter operation models Offers low noise models Connects easily DOWNLOAD BROCHURE Liebert Indoor Condenser Liebert Series PB Condensers Features: Indoor system-matched condenser Connects easily Provides flexible installation in a small footprint DOWNLOAD BROCHURE… Continue Reading →
DOWNLOAD BROCHURE Liebert Outdoor Drycooler Liebert Low Profile Drycoolers, Liebert 10-Fan Drycoolers Features: System-matched outdoor drycooler Operates in low temperatures with winter operation models Offers low noise models Connects easily Liebert Indoor Drycooler Liebert Series PB Drycoolers Features: Indoor system-matched drycooler Connects easily Provides flexible installation in a small footprint BACK TO HEAT REJECTION
Liebert PFH™ Outdoor Condensing Unit Features: Outdoor air cooled condensing unit Supports smaller Liebert precision cooling systems Installs easily Operates quietly Liebert MCD™ Indoor Condensing Unit Features: Indoor air and water/glycol condensing unit Supports smaller Liebert precision cooling systems Installs easily Operates quietly DOWNLOAD BROCHURE Liebert DMC™ Indoor Condensing Unit Features: Indoor water or glycol… Continue Reading →
Liebert CRV Row-based Precision Cooling System Features: Precision cooling and humidity control Installs within the row of racks Features variable speed EC plug fans and variable capacity digital scroll compressor Operates efficiently with Liebert iCOM controls DOWNLOAD BROCHURE Liebert Challenger ITR Precision Cooling System Features: Installs in the row of racks/li> Precision cooling and humidity… Continue Reading →
Liebert DS™ Precision Cooling System Features: Precision cooling and humidity control Provides component redundancy — compressors, motors and blowers Offers multiple configurations and sizes for flexible application Monitors and controls operation with Liebert iCOM DOWNLOAD BROCHURE Liebert CW Chilled Water Based Precision Cooling Features: Precision cooling and humidity control Offers upflow and downflow models Monitors… Continue Reading →
Liebert ICS™ Industrial Cooling Series Features: Industrial-quality precision cooling and humidity control Provides redundant critical components for reliable operation Offers multiple configurations and sizes Controls and monitors with local or remote options DOWNLOAD BROCHURE BACK TO FLOORMOUNT
Liebert Mini-Mate™2 Ceiling Mounted Precision Cooling System Features: Ceiling-mounted cooling and humidity control Installs as self-contained or split system Offers direct supply/return or ducted applications Cools small rooms or hot spots/zones DOWNLOAD BROCHURE BACK TO CEILING & WALLMOUNT
Liebert Datamate™ Precision Cooling System Features: Wallmount cooling and humidity control Cools hot spots or zones Installs as self-contained or split systems Operates quietly DOWNLOAD BROCHURE Liebert InteleCool®2 Shelter Cooling System Features: Outdoor wallmount shelter cooling Installs easily — self-contained unit Offers compressor and outside air options DOWNLOAD BROCHURE BACK TO CEILING & WALLMOUNT
High heat density system can cool more than 30 kW per rack Offers floor-mount, rack-mount and ceiling-mount configurations Utilizes pumped refrigerant, which is ideal for use around electronic equipment Enhances the hot aisle/cold aisle approach to cooling DOWNLOAD BROCHURE Liebert XD Refrigerant-based Cooling Modules Liebert XDV, Liebert XDO, Liebert XDH, Liebert XDR, Liebert XDCF Features:… Continue Reading →
Water based high heat density cooling solution Offers rack enclosure and door-mounted models Leverages existing building chilled water loop Liebert XD Water Based Cooling Modules and Racks Liebert XDK-W, Liebert XDR-W Features: Water-based high heat density systems Full enclosure system, or back-of-rack-installed module Leverage existing building chilled water loop Compatible with Liebert coolant pumping unit… Continue Reading →
High capacity cooling enclosure Provides a packaged solution to housing and cooling rack equipment Offers total protection when combined with Liebert UPS and power strips Offers an ideal solution for applications where hot aisle/cold aisle approach is not practical Liebert XDF™ High Heat Density Enclosure Features: Integrated cooling — digital scroll compressor for efficient and… Continue Reading →
Easily installed rack fan unit Enhances existing cooling solutions Liebert XDA™ Air Flow Enhancer Features: Five-fan rackmounted unit improves horizontal rack air flow Installs quickly and easily Provides redundant components to ensure reliability Enhances data center precision cooling systems DOWNLOAD PRODUCT SHEET BACK TO LIEBERT XD SYSTEM
One-to-one power protection is available with Liebert off-line and line-interactive UPS systems suitable for home and small office applications. These systems provide surge suppression, as well as sufficient battery back-up to save work in the event of a power outage. Liebert PSP, 350 – 650VA NEW PRODUCT FAMILY! Stand-by UPS Features: Stand-by UPS Offers three… Continue Reading →
Emerson Network Power offers a range of UPS systems with the reliability, features, and flexibility required by networks and electronics in rack environments. Liebert PSI-XR, and Liebert PSI 1000 – 3000VA NEW PRODUCT FAMILY! Line-Interactive UPS Features: Line-interactive UPS Installs easily, with rack/tower configurable 2U size Protects against downtime with internal battery, and optional extended… Continue Reading →
True on-line protection for network servers, bridges, hubs, routers, storage devices and critical workstations. Liebert GXT3-MT™, 1000VA NEW PRODUCT FAMILY! On-line UPS Features: Single phase on-line UPS Compact mini-tower configuration is ideal for tight spaces Offers generator compatibility Provides wide input voltage range for fewer transfers to battery DOWNLOAD DATA SHEET Liebert Nfinity™, 4 –… Continue Reading →
Reliable surge suppression, and distribution and maintenance bypass products ensure continuous power to your critical systems. Liebert MicroPOD™ Maintenance Bypass and Output Distribution Accessory Features: Manual switchover from UPS to utility power Allows continuous operation for connected equipment during UPS maintenance or replacement Installs with plug-and-play ease Operates with any brand of UPS, 3kVA or… Continue Reading →
Liebert offers UPS and backup power to protect large data centers, as well as facility-wide protection for sensitive electronics. Redundant configurations and dual bus capabilities ensure continuous operation for critical systems. Liebert NX™, 40 – 200 kVA On-Line UPS Features: Scalable UPS protection for growing data centers Offers models with capacity growth without increasing footprint… Continue Reading →
Liebert integrated enclosure systems include self-contained air conditioning, UPS and wiring management in a sturdy, lockable cabinet. To meet the needs of today’s high heat-density equipment, Emerson Network Power offers Liebert XD extreme density enclosures with refrigerant or water cooling source options, and innovative flexible piping solutions Knurr DCM Racks and Enclosures Features: 19″ rack… Continue Reading →
While computers and other sensitive electronics have changed over the past years, one thing remains constant: excessive heat, poor power quality and unauthorized access can damage or impair the operation of vital systems and peripherals. Liebert IP Telephony Availability System UPS, Distribution and Enclosure Features: Pre-packaged power/enclosure solution for IP Telephony systems Meets Cisco test… Continue Reading →
IT and Facility Managers need to reliably and efficiently distribute power to rack-based networking equipment via rack Power Distribution Units. Whatever the level of criticality — basic distribution, remote monitoring, or control at the receptacle level — there is an Emerson Network Power Rack PDU solution to fit your application needs. Emerson Network Power Family… Continue Reading →
Innovative Knurr racks are bundled with Liebert UPS, Rack Power Distribution and Monitoring products, providing a convenient and easily deployed solution to protect IT equipment. Data Center Ready Racks Ready-to-Install Rack and Power Bundles Features: Fully configured solution 9 rack and power options Ready to install DOWNLOAD BROCHURE BACK TO RACKS & INTEGRATED CABINETS
Emerson Network Power provides a platform of technologies designed to optimize the efficiency, design and operation of your data center infrastructure through Cold Aisle Containment and intelligent control. SmartAisle Intelligent Cold Aisle Containment Platform Features: Intelligent Cold-Aisle Containment Solution Provides energy savings of 30+% Allows 30+% increase in IT equipment density Employs Knurr racks, Liebert… Continue Reading →
IT and Facility Managers need to reliably and efficiently distribute power to rack-based networking equipment via rack Power Distribution Units. Whatever the level of criticality — basic distribution, remote monitoring, or control at the receptacle level — there is an Emerson Network Power Rack PDU solution to fit your application needs. Emerson Network Power Family… Continue Reading →
Protection from Electrical Line Problems For applications requiring protection from electrical line problems without the need for back-up capability, Emerson Network Power manufactures a full line of power conditioning equipment to shield critical loads from external disturbances. Liebert power distribution systems efficiently deliver this conditioned power to your equipment. Liebert MB Modular Busway Features: Modular… Continue Reading →
Ultra Fast Switching Between Two Independent AC Power Sources Transfer Switches Transfer Switches provide ultra fast switching between two independent AC power sources, offering virtually uninterrupted power to sensitive electronic equipment. When used with redundant AC power sources, the static transfer switch permits maintenance without shutting down critical equipment. Power Distribution For applications requiring protection… Continue Reading →
Monitoring and Control of Critical Support Equipment from a Centralized Location Centralized site monitoring assures maximum visibility and availability of your critical operations. Liebert solutions allow you leverage Web technology to oversee and control critical support systems — anywhere, anytime. Liebert Monitoring Products Family Brochure Liebert SiteScan® Web Centralized Monitoring and Control Features: Centralized site… Continue Reading →
Liebert Nform can be configured to monitor your network for alarm notifications from Liebert power protection and mission-critical cooling equipment. These alarms can be processed to trigger event actions such as e-mail alerts or local notifications. Software Solutions Liebert Nform™ is a network communications system that will enable you to leverage the distributed monitoring capabilities… Continue Reading →
A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection. Liebert Monitoring Products Family Brochure Liebert MultiLink® Automated Shutdown Software Features: UPS monitoring software Operates with single computers or large networks Initiates shutdown when needed Supports email, pagers, audio and on-screen… Continue Reading →
A wide range of leak detection systems provides fast detection and location reporting of potentially hazardous fluid leaks. Liebert Leak Detection Liqui-tect Brochure Liebert Liqui-tect® Two Channel Leak Detection System Features: Two zone leak detection monitor Monitors up to 5000 feet of leak detection cable in each zone Measures and reports distance of leak from… Continue Reading →
Autonomous microprocessor-controlled modules provide supervision and control of Liebert equipment, giving you the ability to monitor up-to-the-second status on system protection. Information can also be provided to centralized facility management. Liebert Monitoring Products Family Brochure Liebert OpenComms™ EM Environmental Monitor Features: Monitoring/alarm controller Provides temperature/humidity sensors and dry contacts Provides web interface using HTTP, user… Continue Reading →
Emerson Network Power offers the latest in UPS battery monitoring technology with products by Albér — a leader in the field since 1972. Albér technologies are designed to prevent battery failure, optimize useful battery life, reduce maintenance cost and increase safety. Albér Cellcorder® CRT-400 Cell Resistance Tester Features: Hand held battery cell resistance tester Displays… Continue Reading →
Liebert Performance Monitoring provides multiple paths for integrating Liebert equipment into your Building or Network Management system. By incorporating open protocols like Modbus, BACnet and SNMP, Emerson Network Power delivers robust and effective integrated solutions. Liebert SiteScan® Web Centralized Monitoring and Control Features: Centralized site monitoring Provides real-time monitoring and control Allows alarm/event management Operates… Continue Reading →
Surge protection prevents power disturbances from damaging sensitive home or office equipment, including TVs, home theaters, satellite dishes, computers, printers, copiers and fax machines. Islatrol® SP-6TVN Surge Suppressor Features: Multi-outlet Active Tracking Filter and surge suppressor Fits a standard duplex receptacle Provides rotating, repositionable outlets Monitors for improper wiring/grounding DOWNLOAD BROCHURE Liebert PSS Surge Protection… Continue Reading →
Emerson Network Power transient voltage surge suppression (TVSS) and filtering products offer ideal physical size and energy handling capability for branch panel or mission-critical applications in medium to low exposure locations. Liebert PowerSure® Panel LPM Series Transient Voltage Surge Suppressor Features: Non-modular medium exposure TVSS Displays LED indication per phase Provides remote indication capabilities Alerts… Continue Reading →
Emerson Network Power offers surge protection products that are ideal for the most severe exposure locations. This family of surge protection devices attenuate the level of transients experienced at service entrance and distribution panels. Liebert Type SS™ Surge Suppressor Features: Modular TVSS Meets standards for Motorola R56 compliance Offers ideal protection for communications equipment Increases… Continue Reading →
These products guard sensitive low voltage instrumentation against ‘backdoor’ transients and noise. Edco® Rackmount Series Surge Protection Device Features: Rackmount multiple data line surge protection Protects against high energy transients Operates with three-stage hybrid technology Provides an ideal solution for network patch panels, switches, and hubs DOWNLOAD BROCHURE Edco® PC642 Series Surge Protection Device Features:… Continue Reading →
RiMatrix S Standard Room The standardized data center is assembled at your premises. The combination of door and roof components provide hot aisle/cold aisle containment and allow consistent separation of hot and cold air. RiMatrix S Standard Security Room The standardized data center at your premises is equipped with an additional security room feature (room-within-a-room)… Continue Reading →
TS IT The new IT platform based on TS 8 for all applications. Intelligent enclosure and accessory system with reduced complexity and assembly friendly plug & play technology. Load capacity 1500 kg. Distributor Racks Distributor racks for optimum accessibility from all sides during assembly and installation, and unrestricted airflow due to the open design. BACK… Continue Reading →
VerticalBox Compact 19″ enclsoure for small networks that may be used for wall-mounted, under-desk or desktop applications. FlatBox 19″ housing that may be disassembled and can be used as for wall-mounted or free standing applications. EI Wall-Mounted Housings Two or three part wall-mounted housing with viewing window. Protection category IP 54 or IP 55. AE… Continue Reading →
Power System Module – PSM One or two infeeds, with one or three phases; redundant when the plug-in module’s direction of connection is changed. With voltage, current and power consumption measurement, as an option. Power Distribution Unit – PDU Intelligent power distribution system – Depending on the version, available with C13/C19 slots or in the… Continue Reading →
Liquid Cooling Packages CW LCP: Extremely high heat loads are dissipated from IT racks via air/water heat exchangers. DX LCP:Ideal for cooling of small and medium-sized IT applications. Aisle Containment Door and roof components separate hot and cold air in the data center. Increases the efficiency of the climate control systems. Can be used as… Continue Reading →
CMC III Monitoring System Monitor/Keyboard unit with 17″ TFT display and VGA/DVI connection Management Software BACK TO IT INFRASTRUCTURE
Micro Data Center Security safes available in various models to provide physical protection for one or more server enclosures. By adding various configuration components the safe becomes a fully equipped micro data center. Data Centr Container DCC Data Center Container for mobile or temporary use of IT systems which includes an innovative, direct free cooling… Continue Reading →
Enhanced GL300E-2432 Series Enclosures Enhanced Series 19″ Rack Mount Enclosure Shipping Weight: 170 lbs Dimensions: 30.00″H x 24.00″W x 32.00″D Rack Spaces: 13 U 19″ 310-D Compliant Stock Colors: Advantage Gray, Black or Nitro Blue Weight Capacity: 300 lbs. 3001E-2432: Base unit with two (2) pair of black powder coated universal 19″ mounting rails (M6)… Continue Reading →
Enhanced GL480E-2432 Series Enclosures Enhanced-Series Enclosure 19″ Rack Mount Enclosure Shipping Weight: 200 lbs Dimensions: 48.00″H x 24.00″W x 32.00″D Rack Spaces: 24 U 19″ 310-D Compliant Stock Colors: Advantage Gray, Black or Nitro Blue Weight Capacity: 600 lbs. 4801E-2432: Base unit with two (2) pair of black powder coated universal 19″ mounting rails (M6)… Continue Reading →
Enhanced GL600E-2432 Series Enclosures Enhanced-Series Enclosure 19″ Rack Mount Enclosure Shipping Weight: 230 lbs Dimensions: 60.00″H x 24.00″W x 32.00″D Rack Spaces: 31 U 19″ 310-D Compliant Stock Colors: Advantage Gray, Black or Nitro Blue Weight Capacity: 600 lbs. 6001E-2432: Base unit with two (2) pair of black powder coated universal 19″ mounting rails (M6)… Continue Reading →
720E-2432 Enhanced Series Enclosures Enhanced-Series Shipping Weight: 300 lbs Dimensions: 72.00”H x 24.00”W x 32.00”D Rack Spaces: 39 U Stock Colors: Advantage Gray or Black 7201E-2432: Base unit with two (2) pair of zinc plated 12 gauge steel, 19″ mounting rails, adjustable levelers and package of mounting screws TPE-24L: Removable louvered top panel with two… Continue Reading →
720E-2436 Enhanced Series Enclosures Enhanced-Series Shipping Weight: 300 lbs Dimensions: 72.00”H x 24.00”W x 36.00”D Rack Spaces: 39 U Stock Colors: Advantage Gray or Black 7201E-2436: Base unit with two (2) pair of zinc plated 12 gauge steel, 19″ mounting rails, adjustable levelers and package of mounting screws TPE-24L: Removable louvered top panel with two… Continue Reading →
720E-2932 Enhanced Series Enclosures Enhanced-Series Shipping Weight: 350 lbs Dimensions: 72.00”H x 29.00”W x 32.00”D Rack Spaces: 39 U Stock Colors: Advantage Gray or Black 7201E-2932: Base unit with two (2) pair of zinc plated 12 gauge steel, 19″ mounting rails, adjustable levelers and package of mounting screws TPE-29L: Removable louvered top panel with two… Continue Reading →
720E-2936 Enhanced Series Enclosures Enhanced-Series Shipping Weight: 350 lbs Dimensions: 72.00”H x 29.00”W x 36.00”D Rack Spaces: 39 U Stock Colors: Advantage Gray or Black 7201E-2936: Base unit with two (2) pair of zinc plated 12 gauge steel, 19″ mounting rails, adjustable levelers and package of mounting screws TPE-29L: Removable louvered top panel with two… Continue Reading →