WS Series of Wall Mount/Swing Out Enclosures provide 19″ 310-D compliant mounting in a heavy-duty distribution enclosure. This durable enclosure features a center swing out section for outstanding front and rear access to cables and equipment. A simple finger pull/latch mechanism located inside the enclosure opens the 18.375″ deep center swing section.

Remote installation of equipment before wiring is possible with a set of optional casters. Optional casters increase the weight capacity and stability of the enclosure.

The weight capacity will depend on the size of the enclosure, method of mounting and type of wall construction if wall mounted.

Note: Standard unit is configured with a solid door and side panels. Total width and depth including hinges is 24.875″ W and 24.688″ D. Casters add 3.625″ to the total height. Two pairs of 12-24 tapped 19″ EIA rails are provided with each enclosure.


GL24WS-SS: Solid Front Door & Solid Sides
Dimensions: 24″H x 24″W x 24″D
Weight Capacity: 125 lbs. 250 lbs.*
Rack spaces: 11 U
Shipping weight: 125 lbs.
GL24WS-SV: Same as GL24WS-SS except with Solid Front Door & Vented Sides
GL24WS-PS: Same as GL24WS-SS except with Plexi Front Door & Solid Sides
GL24WS-PV: Same as GL24WS-SS except with Plexi Front Door & Vented Sides

GL36WS-SS: Solid Front Door & Solid Sides
Dimensions: 36″H x 24″W x24″D
Weight Capacity: 150 lbs. 300 lbs.*
Rack spaces: 18 U
Shipping weight: 150 lbs
GL36WS-SV: Same as GL36WV-SS except with Solid Front Door & Vented Sides
GL36WS-PS: Same as GL36WV-SS except with Plexi Front Door & Solid Sides
GL36WS-PV: Same as GL36WV-SS except with Plexi Front Door & Vented Sides

GL48WS-SS: Solid Front Door & Solid Sides
Dimensions: 48″H x 24″W x 24″D
Weight Capacity: 200 lbs. 350 lbs.*
Rack Spaces: 25 U
Shipping weight: 200 lbs.
GL48WS-SV: Same as GL48WS-SS except with Solid Front Door & Vented Sides
GL48WS-PS: Same as GL48WS-SS except with Plexi Front Door & Solid Sides
GL48WS-PV: Same as GL48WS-SS except with Plexi Front Door & Vented Sides

GL72WS-SS: Solid Front Door & Solid Sides
Dimensions: 72″H x 24″W x 24″D
Weight Capacity: 275 lbs. 450 lbs.*
Rack Spaces: 38 U
Shipping weight: 275 lbs.
GL72WS-SV: Same as GL72WS-SS except with Solid Front Door & Vented Sides
GL72WS-PS: Same as GL72WS-SS except with Plexi Front Door & Solid Sides
GL72WS-PV: Same as GL72WS-SS except with Plexi Front Door & Vented Sides

*Maximum weight capacity at minimal deflection.
Weight capacities are listed for Wall Mounting only.
Up to 850 lb. weight capacity is possible using a combination of wall mounting and casters.

• Finger pull/latch for opening and closing center swing section
• Heavy-duty distribution enclosure
• Reversible cabinet mounting design for left or right- hand swing out
• Reversible door
• Front and rear access to cables and equipment
• Knockouts sized for 1″, 2″, 3″ and 4″ conduit and fittings located at top, bottom and rear

ACCESSORIES

7206-FM: Stationary front mount shelf – 17.25″W x 18.00″D
7206-EIA: Stationary shelf – 17.468″W x 18.00″D
7206-SL: Sliding shelf – 16.343″W x 17.50″D
7219: Rack mount 6 position power strip with circuit breaker & 15 ft. cord
7219-SR14: Rack mount 14 position (6 front/8 back) power strip with circuit breaker and surge suppressor
7217WS: Fan assembly w/fan guards & two 75 CFM fans
WS-22: 66/110 block mounting panel
7208WS: Casters – (3) locking & (3) non-locking (3.625″H)
7208WS-ALL: Casters – (6) locking (3.625″H)
CBB-19: Copper bus bar, 19″ rack mounted (isolated)
FFK1: Four fan filters (works with the WM, WS and WD Series of Wall Mount Products)

DOWNLOAD BROCHURE