Listed to UL60950-1
Stock Color: Black
WM Series Wall Mount Swing Out Enclosures
WM Series Wall Mount/Swing Out Cabinets provide 19″ 310-D compliant mounting in a distribution enclosure. A simple finger “push-pull” type catch located inside the cabinet opens the 18.00″ deep center swing section. The center swing out feature provides outstanding front and rear access to cables and equipment.
The reversible cabinet mounting design makes left or right-hand swing out possible. This convenient feature also conserves valuable wall space. Knockouts sized for 1″, 2″, and 3″ conduit and fittings are located at the top, bottom and rear for easy wiring, installation and maintenance.
Front and rear sections lock independently for added security.
Note: GL2418WM, GL24WM, GL36WM and GL48WM are configured with a plexiglas door and vented sides. Two pairs of 12-24 tapped 19″ EIA rails are provided with each enclosure.
Equipment mounting hardware included.
GL2418WM
Dimensions: 24″ H x 21.25″W x 18″D
Weight capacity: 50 lbs. 150 lbs.*
Rack spaces: 12U Shipping weight: 85 lbs.
GL2418WMS
Same as GL2418WM except solid door
GL24WM
Dimensions: 24″ H x 21.25″ W x 24.50″ D
Weight capacity: 50 lbs. 150 lbs.*
Rack spaces: 12U
Shipping weight: 95 lbs.
GL24WMS
Same as GL24WM except solid door
GL36WM
Dimensions: 36″ H x 21.25″ W x 24.50″ D
Weight capacity: 75 lbs. 250 lbs.*
Rack spaces: 19U
Shipping weight: 125 lbs.
GL36WMS
Same as GL36WM except solid door
GL48WM
Dimensions: 48″ H x 21.25″ W x 24.50″ D
Weight capacity: 120 lbs. 300 lbs.*
Rack spaces: 25U
Shipping weight: 160 lbs.
GL48WMS
Same as GL48WM except solid door
* Maximum weight capacity at minimal deflection.
ACCESSORIES
7217WS: Fan assembly with fan guards and two 75 CFM fans
7206-FM: Stationary front mount shelf – 17.25″W x 18.00″D
7206-EIA: Stationary shelf – 17.468″W x 18.00″D
7206-SL: Sliding shelf – 16.343″W x 17.50″D
7206-14: Stationary shelf 17.50″W x 14.00″D (Recommended for GL2418WM)
7219: 6 position power strip with circuit breaker & 15ft. cord for 19″ mounting
7219-SR14: 14 position (6 front/8 back) power strip w/circuit breaker and surge suppressor for 19″ mounting
7219-20AR: 6 position power strip w/circuit breaker, 20 amp
CBB-19 Copper bus bar, 19″ rack mounted (isolated)
FFK1: Four fan filters (works with the WM, WS and WD Series of Wall Mount Products)